to discuss and learn more about how to replace or repair iphone parts.

Sunday, August 20, 2017

Common mistakes while replacing iPhone screen -- case 5 connecting & removing connector error

after successfully open the iPhone .you might be so excited .and be less careful while removing the plug .the wrong way to removing and connecting the plug & connector would easily got the screen damaged .or furthermore ,got logic board connector damaged ! if logic board connector got damaged ,even you have new screen .you already can do nothing with your iPhone .

when removing the connector ,do not use "hand" to pull them ! instead ,Use the flat end of a spudger, or a fingernail, to disconnect the digitizer cable by prying it straight up from its socket on the logic board.



and most importantly .When reconnecting the cabledo not press the center of the connector. if the position is correct ,you don't need too much force .Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the
component and cause damage.



Share:

1 comment:

  1. Thank you for sharing such a nice blog with useful information. I would like to know more about Iphone screen replacement.
    Iphone screen replacement

    ReplyDelete

Translate

Sintron

Search This Blog

Powered by Blogger.

Blog Archive

Hot Post

Fully Assembled -- Sintron iPhone LCD & Screen replacement

What is the difference Between Fully Assembled and normal iPhone LCD&Screen  ? Traditionally ,if your iPhone LCD/Screen go...