to discuss and learn more about how to replace or repair iphone parts.

Saturday, September 16, 2017

How to Avoid damaging your iPhone logic board

no matter what model of iPhone you are trying to DIY replacement .or what parts you are replacing ( most of time LCD & Screen ) .the first thing you need to do is to power it off .and that's just the basic step .(check Sintron iPhone instruction guide)

the important thing you need to know is ,even you already power it off .there's still some voltage on your iPhone .so any short circuit or contact during installation process is also possible to cause instant high voltage .which is possible to burn your logic board .and your iPhone would be useless at all .

as we might know .if this is your first time to replace the LCD & Screen .it's possible that you need to sacrifice a few LCD & Screens before you can get familiar with it (i mean for those they don't check our guide and blog carefully ,if you did check our every points ,there's a big chance you can get it done from beginning ) .Sacrificing a few LCD & Screen are find .they are not expensive .but if you burn your logic board .you would loss a lot !

so to be safe .please must remove the battery plug and also put an insulator between the plug and your logic board .then usually in this case . your iPhone would be very safe !



Share:

1 comment:

  1. Thank you for sharing such a nice blog with useful information. I would like to know more about Iphone screen replacement.
    Iphone screen replacement

    ReplyDelete

Translate

Sintron

Search This Blog

Powered by Blogger.

Blog Archive

Hot Post

Fully Assembled -- Sintron iPhone LCD & Screen replacement

What is the difference Between Fully Assembled and normal iPhone LCD&Screen  ? Traditionally ,if your iPhone LCD/Screen go...